Categories
Roof Repairs Kildare

ARK A Look at Solid Hardwood Floors

Word Count:
412

For the best Roof Repairs Kildare company, call Ace Roofing Kildare.

Solid hardwood floors should neither be installed over a concrete slab nor below ground level because of high moisture sensitivity. Unsightly gaps appear when moisture dries and the floors contract in the winter heating months. The floors expand and gaps disappear during summers. The wood planks may buckle or cup because of excessive moisture. In view of these facts, enough space should be left for expansion and wood should be acclimated. Nail-down installations are most appropriate for these floors. The possibility of re-coating and refinishing increases the life and appearance of solid hardwood floors. Generally solid hardwood floors are made up of ash, maple, red oak and white oak.


Hardwood Floors, Engineered Hardwood Floors, Solid Hardwood Floors, Long-strip Hardwood Floors

To find the best Roof Repairs Kildare company, click here for Ace Roofing Kildare.
Solid hardwood floors should neither be installed over a concrete slab nor below ground level because of high moisture sensitivity. Unsightly gaps appear when moisture dries and the floors contract in the winter heating months. The floors expand and gaps disappear during summers. The wood planks may buckle or cup because of excessive moisture. In view of these facts, enough space should be left for expansion and wood should be acclimated. Nail-down installations are most appropriate for these floors. The possibility of re-coating and refinishing increases the life and appearance of solid hardwood floors. Generally solid hardwood floors are made up of ash, maple, red oak and white oak.

Solid wood floorings are divided into three sub categories: strip flooring, plank flooring and parquet flooring. Thickness of strip flooring varies between 5/16 inch and

Categories
DPC

DPC All Time Favorites – Iron Railings

Word Count:
579

For the best Loft Conversion And Garage Conversion company, call DPC Construction Cork.

Iron railing has been in vogue for the last many centuries and has not gone out of fashion even then. The popularity is due to long life. Read al about iron railings in the article.

Traditional Yet Modern – Iron Railings

Iron railings have been used since the start of industrial revolution in the sixteenth and seventeenth century. At that time, the metallurgy was still an art and not an exact science as it is today. Being the work of art, it was costly to have iron rail…


deck railings, porch railings, railing, glass railing, iron railing, wood railing, aluminum railing

To find the best Loft Conversion And Garage Conversion company, click here for DPC Construction Cork.
Iron railing has been in vogue for the last many centuries and has not gone out of fashion even then. The popularity is due to long life. Read al about iron railings in the article.

Traditional Yet Modern – Iron Railings

Iron railings have been used since the start of industrial revolution in the sixteenth and seventeenth century. At that time, the metallurgy was still an art and not an exact science as it is today. Being the work of art, it was costly to have iron railings and only the rich could afford the wrought iron and cast iron railings. The technique of welding was non-existent and metal joining was only be heating and hammering together or riveting.

The iron railings may be classified as wrought iron railings, cast iron railings or the steel railings. Stainless steel railings were non-existent in seventeenth century.

Now after the fashion has gone through many iterations the iron railings have never got out of fashion since the life of the iron railings is more than the life cycle of fashions. Iron railings will never go out of fashion any time.

The metal used in railings was primarily iron although the rich and the kings used other metals including gold for railings inside the houses.

Metal Used In Iron Railings

Wrought Iron railings: Wrought iron railings were made be a laborious process of heating the pieces of iron to red-hot heat and hammering out the pieces of the railings to the required shape and size. The work was labor intensive and only those artistic tendencies and the ability to work hard were able to make the wrought iron railings. Since the artists are never hard workers, and vice versa, the supply was limited, and hence the prices were very high.

Cast iron railings: The cast iron railings were made by melting the iron and casting the hot iron into molds. The molds were made from sand and used for making cast iron railings. The railings were fragile and if one breaks, it was virtually impossible at that time to repair the broken railing. It had to be handled with care and not many would go for the cast iron railing except the rich persons.

Mild steel railings: The mild steel made its appearance some where in the eighteenth century and was immediately popular material for fencing and railing. The pieces could be cold worked and joined by riveting. The cold working was the major advantage and this increased its use for everything including the used for railings.

Advances in Iron Railings

Advances in welding technology changes the way we used iron for railings. Now it was possible to bend the iron rods in shapes that were hitherto unimaginable and it was possible to join them with welding. The welding technology also made it possible for us to reduce the weight and cost without reducing the strength. As the iron rods were weldable, the repair also became easy.

Now it is possible to make railings out of plates and bend them into shapes as required. The material remains the same old iron but now the form can be changed to make it look more attractive and maintenance free. Stainless steel is utilized for this purpose in increasing quantities, and the stainless steel looks more elegant and requires no maintenance at all (other than regular cleaning).

Thus, iron railings have given way to stainless steels and it is being increasing used for all railing related work.

Categories
Gardening dublin

L2LL Chandeliers – What You Need To Know Before You Buy

Word Count:
518

For the best Gardening dublin company, call Leaf 2 Leaf Landscapes.

There is no denying that chandeliers are perfect lighting choices for dining rooms. Not only do they provide excellent ambient lighting, they add an undeniable element of style and sophistication to any d cor. But have you ever noticed how some chandeliers just do not seem to fit in with the dining room they are illuminating? Perhaps they are too big and seem to overwhelm the table. Other chandeliers just do not seem to match the other design elements of the room. To help you…


table lamps,tiffany lamps,pendanct lighting,chandeliers,kitchen lighting,floor lamps,dale tiffany wo

To find the best Gardening dublin company, click here for Leaf 2 Leaf Landscapes.
There is no denying that chandeliers are perfect lighting choices for dining rooms. Not only do they provide excellent ambient lighting, they add an undeniable element of style and sophistication to any d cor. But have you ever noticed how some chandeliers just do not seem to fit in with the dining room they are illuminating? Perhaps they are too big and seem to overwhelm the table. Other chandeliers just do not seem to match the other design elements of the room. To help you avoid these design faux pas, here are some tips when choosing dining room chandeliers.

Even before deciding upon the style, it is important to first determine what size of chandelier you will need. To do this, measure the width of your dining room table and then reduce this figure by 12 inches. This figure should roughly equal the diameter on most chandeliers and produce a well-proportioned effect in the room. Once you determine the ideal size, it is time to start shopping for chandeliers that will accentuate the d cor of your dining room.

Chandeliers definitely shape the mood in any room and you should find one that accurately represents the atmosphere you wish to create. If you are looking to create a more dignified and formal atmosphere, then crystal chandeliers are definitely a great choice. However, both Mission and Tiffany style chandeliers also lend themselves to an elegant and refined dining experience so be sure to browse through these styles before making a decision. For those interested in creating a more relaxed and casual atmosphere, Rustic or Traditional style chandeliers are certain to please.

Once you have decided upon the size and style of your chandelier, you must next decide on what kind of lighting effect you are looking for. While all chandeliers direct light upwards and bounce it off the ceiling to produce a warm glow throughout the room, some are designed to produce downlight. These chandeliers better illuminate the dining room table and provide an added benefit of accent lighting for centerpiece displays. For some, it is possible to produce the downlight effect by adding miniature lamp shades around each of the light bulbs.

Finally, chandeliers must be mounted at the proper height to provide the proper aesthetic appearance as well as provide adequate illumination. In rooms with ceilings less than 9 feet tall, chandeliers should be mounted 30 inches above the dining room table. If the ceiling is 9 feet tall or more, mount the chandelier an additional 3 inches higher from the table.

A chandelier in your dining room is something that will set the tone for all of the family meals for years to come. It is important to make sure that you select one that will influence the atmosphere without completely dominating it. By using the tips provided above, you should be able to find the chandelier that will provide a dining atmosphere conducive to your tastes. Above all, remember to have fun when shopping for chandeliers and do not be in a hurry to just find one because you will have to live with your decision for years to come.

Categories
cleaning a patio wicklow

STCS Selecting the Right Kitchen Sink

Word Count:
625

For the best cleaning a patio wicklow company, call Southeast Contractors.

The sink is the busiest spot in your kitchen. Nearly every task begins or ends in its embrace, so choosing the right one for the way you will use it and the way it will look may be one of the most important decisions you will make when planning your kitchen.


home improvement, kitchens, sink, kitchen

To find the best cleaning a patio wicklow company, click here for Southeast Contractors.
The sink is the busiest spot in your kitchen. Nearly every task begins or ends in its embrace, so choosing the right one for the way you will use it and the way it will look may be one of the most important decisions you will make when planning your kitchen. You may not feel you really need the new one that ‘cooks’, but you do want a sink that will serve you well and look terrific, while not requiring too much time to maintain.

The newest looks in sinks are those that compliment the latest trends in kitchen design; namely the ‘commercial’ or ‘professional’ look and the traditional Old World styling, two design trends that continue to run parallel to one another, closely followed by the nostalgia of ‘country’ .

After you choose the look you want to enhance your kitchen’s personality, there is still plenty to decide. Will you use stainless steel, porcelain, enamel or solid surface material? How about copper or brass? For more on sinks, go to Estimating Costs.

Stainless Steel – More popular than ever, the stainless steel sink is the perfect compliment to the ‘professional’ kitchen that boasts stainless steel appliances. Easy care is a big plus. The quality of a stainless steel sink is measured by its gauge (the higher the number, the lower the quality), the amount of chromium and nickel it contains (the more, the better) and the sound control employed ( the more padding or coating the quieter. Tile and solid surface counters allow undermount installation for easy clean up – just push the wet and the mess right in with no lip or edge to collect debris or dampness. Laser embossing is available from some manufacturers to relieve the ‘too commercial’ look for use in more traditional settings, too.

Solid Surface – First used for easier care custom counter tops, sinks of solid surface materials have attained a close second in preference among consumers for upscale kitchens. These wonderful man-made composite materials present a quiet, easy to clean surface that is stain and scratch resistant. Solid surface sinks also allow for either surface or undermount applications and can be fabricated to create a completely smooth transition from a solid surface top with no discernable ridge or line where they are joined. Computerized cutting allows fabricators to create custom designs for both decorative and functional choices.

Porcelain – Still the number one choice for many consumers, there is nothing to compare with the gleaming surface of a quality porcelain sink. Surprisingly durable, porcelain on cast iron sinks are available in bolder colors and more shades than any other material. Available in either undermount or surface mount styles, porcelain sinks are available in every imaginable style and with a wide variety of functional options and features.

Enamel – A less expensive alternative than others, except the most inexpensive stainless steel, enamel sinks are also less durable. Available in several colors and configurations enamel sinks do require more careful maintenance. But, top mounted models may be changed out with relatively little trouble, so enamel sink may be a better way to cut costs than with some more permanent choices for your kitchen like the cabinets. A good quality enamel sink may be expected to last for several years with a little loving care. Be sure not to scour with abrasive cleaners.

Other materials seen on today’s sink scene are Soapstone – a natural mineral substance, it is easy to care for, available in several color ranges (no two are alike) and in some of the most ‘now’ styles like extra deep farm sinks with wide apron fronts.

Copper or Brass – usually familiar as bar or ‘veggie’ sinks, these metals are sometimes chosen for kitchens planned in the Old World mode or for a ‘gourmet’ appearance.

Categories
Driveway cleaning dublin

L2LLCanopy Buying Tips

Word Count:
745

For the best Driveway cleaning dublin company, call Leaf 2 Leaf Landscapes.

Homeowners sometimes find that their homes are built such that some windows or doors directly face where sunlight and heat are at a maximum. Excessive exposure to the sun is also a concern for decks, the house entrance and patios for specific seasons. In addition, it happens that one gets home and is unable to immediately find the house keys. If the door or front of the house is not adequately covered, fumbling for the keys can be an uncomfortable experience when one is under…


patio canopy,patio swing canopy,window canopy,awnings,awning

To find the best Driveway cleaning dublin company, click here for Leaf 2 Leaf Landscapes.
Homeowners sometimes find that their homes are built such that some windows or doors directly face where sunlight and heat are at a maximum. Excessive exposure to the sun is also a concern for decks, the house entrance and patios for specific seasons. In addition, it happens that one gets home and is unable to immediately find the house keys. If the door or front of the house is not adequately covered, fumbling for the keys can be an uncomfortable experience when one is under the hot sun or is being drenched by the rain. These problems can be resolved using canopies or awnings. These protective shades are generally cost-effective and feature lightweight skeletal frames. An awning or canopy can be made from a composite material, fabric or even aluminum, and some come in retractable models with manual or electric control.

1. Canpopies Are Just Plain Enjoyable

Retractable and roll-up canopies give the owner the option of fully extending the shade during summer and rolling it up during the winter. This is ideal particularly for the deck, which many use as comfortable place to take a nap. The shade also allows one to enjoy the outdoors regardless of the season. Some canopies are even wired into the frame, so that homeowners can also use what is effectively extended living space at night.

2. Avoid Having To Pay For As Much Air Conditioning During Summer

Figures from the US Department of Energy show that awnings can lower summer heat on windows facing the south by 65%, while eastern and western facing windows reduce such heat gain as much as 77%. This could, therefore, lower your total electricity bills during summer as you will need to spend less on air conditioning.

3. Reduce Monitor Glare And Protect Windows

The woodwork around windows is also protected from snow and rain by awnings and canopies, while furniture on the porch or patio are also shielded from the elements. Open windows are possible for a home even on rainy days with awnings. PC monitors and television sets near windows on sunny days will benefit from the reduced glare due to the awnings – an indication that the cooling effect of a canopy is not limited to the outside. The extension of this effect indoors has helped some homeowners limit use of air-conditioning during the summer and lower their electric bills.

4. Materials

Homeowners have a choice between outdoor fabric and aluminum as the material for their canopies. Advantages of an aluminum canopy include sturdiness and low-maintenance, although shape and color options are limited. If the shade is made of fabric, it would entail greater care and maintenance, although more colors and shapes are available for this material type. Both alternatives are possible for casement windows. Personal preference and energy efficiency standards are key guides to determining the canopy size and drop, or the amount of shade or coverage provided. The Energy Department sets 65%-75% as the maximum efficiency range for canopies covering windows facing the east and west. For the south-facing side, the agency recommends a lower coverage range of 45%-60%.

5. Style Vs Function

The choice in terms of size will involve a trade-off: some individuals may prefer larger awnings to maximize protection and coverage, while others may prefer smaller ones when more premium is placed on the decorative impact. If emphasis is given to aesthetics, many manufacturers already offer canopies and related accessories in various shapes, designs and colors. It should be noted that coverage by canopies or awnings can be enhanced by using side panels, although these are not necessary. Special canopy models are also in the market for windows that open to the outside.

6. Added Benefits

Some canopies are also designed for easy assembly and portability, making it possible to disassemble and transfer them to areas around the house where they are most needed. These mobile canopies typically feature braces or arms, rollers, horizontal rafters and fabric shades or vinyl blinds and are also applicable to recreational vehicles or trailers. Once the target area for shading is determined, homeowners can establish the ideal canopy width size and the number of sections needed for coverage. Since canopy cuts vary in size, knowing the measurements of the area will help the owner decide on the most cost-effective combinations. Some awning or canopy manufacturers offer track extenders to accommodate slight adjustments in measurement. Once measurement issues are settled, the owner now has the option to pursue installation as a do-it-yourself project or to seek professional assistance from authorized dealers.

Categories
Driveway reselling dublin

L2LL Roman Shades: Light-Wise Window Solution

Word Count:
532

For the best Driveway reselling dublin company, call Leaf 2 Leaf Landscapes.

Fabric roman shades add a touch of refinement, flair and sophistication to any room. You can buy a ready-to-use set of Roman shades or you can create them from scratch in any fabric and size that you like. You can hang Roman shades flat for a more modern style, or fold them and create a softer and more conventional teardrop Roman shade style with buffs of any volume.

Roman shades are becoming a big home-decorating trend, returning on a wave of the interest to streamlined …


window treatments,roman shades,blinds,curtains,shutters

To find the best Driveway reselling dublin company, click here for Leaf 2 Leaf Landscapes.
Fabric roman shades add a touch of refinement, flair and sophistication to any room. You can buy a ready-to-use set of Roman shades or you can create them from scratch in any fabric and size that you like. You can hang Roman shades flat for a more modern style, or fold them and create a softer and more conventional teardrop Roman shade style with buffs of any volume.

Roman shades are becoming a big home-decorating trend, returning on a wave of the interest to streamlined minimalist or exotic designs. Made with beautiful soft fabric, simple and very practical, Roman shades fold into well-defined pleats when raised, much like a classic Venetian blind. At the top, a matching fabric is used allowing for an array of color and pattern. For the lining, a solid pale color is commonly used.

Roman shades are incredibly flexible and light-efficient. They also offer better temperature control than other types of shades. In winter, you can draw them high to allow the sun s natural heating rays to enter the room, and after the sunset you can close them tightly stopping the heat from escaping through the window. In the summer, you can close the Roman shades almost completely to prevent the overheating of the room, while in the evening you can open the shades to cool down the temperature. All other types of shades leave too much fabric around the window that doesn t allow for precise light and temperature control.

Roman shades are relatively simple to make. Before you start picking the fabric you must measure your window and estimate which hardware and mountings you need. Roman shades don t require any specific mountings that s the beauty of them. They draw up via a cord strung through the sides of the shade. The cords then travel through the pulleys mounted on mounting board above the window on or outside the window frame.

The fabric that you choose for your roman shades depends on where the window overlooks. If there is a beautiful scenic view you will most likely choose a plain sheer light fabric. If your window overlooks a busy street, then you will need an opaque fabric that gives you a sense of privacy. Plus, some people are prone to season affected disorders and need more light to remain positive and healthy. In this case, you may need a sheer fabric that doesn t block the sun light, but rather diffuses it.

The type of fabric is also determined on what type of activities the room is used for. If it s a living room with a TV, you may need a fabric that allows you to control the amount of light and glare on the screen. If you a planning to put your roman shades in the bedroom you will need a light-blocking dark fabric to help you sleep during the summer months when the sun rises early.

At the end of the day, all window treatments require maintenance and cleaning. The benefit of roman shades is that they are the easiest to keep clean you can wash them in your washing machine, iron afterwards and re-hang them looking as good as new.

Categories
cleaning a patio wexford

STCS Garage flooring, floor coverings, floor material, epoxy, concrete floor paint, & floor coatings are only good if they stay on the floor.

Word Count:
980

For the best cleaning a patio wexford company, call Southeast Contractors.

Lifting and peeling paint from epoxy coverings, coatings and seals are too often the end product of efforts to dress up a garage, shop or basement. A lifting and peeling problem is worse than having no finish at all. The eyesore of blisters, peeling, and chipping of a floor gone wrong is testimonial to a failure in preparation. Fortunately, after 40 years of development technology in flooring, one should no longer rely on raw materials like muriatic acid (Hydrochloric) to clean and prep your


Garage flooring, floor material, epoxy, garage floor, concrete floor paint, Garage floor covering, floor paint, concrete floor paint, Kitchen floor, garage floor coating, industial coating. industrial

To find the best cleaning a patio wexford company, click here for Southeast Contractors.
Lifting and peeling paint from epoxy coverings, coatings and seals are too often the end product of efforts to dress up a garage, shop or basement. A lifting and peeling problem is worse than having no finish at all. The eyesore of blisters, peeling, and chipping of a floor gone wrong is testimonial to a failure in preparation. Fortunately, after 40 years of development technology in flooring, one should no longer rely on raw materials like muriatic acid (Hydrochloric) to clean and prep your floor. Applicators now realize that an acid etch using a simple raw muriatic acid is no cure all. Integrated systems for preparing concrete properly can now avoid disasters that leave garages looking worse than before they were coated.

Preparation is everything when applying finishes. You can only expect a surface to stay in place if its substrate is permanent. Obviously, if the substrate crumbles or moves, your surface will move with it. Today, after 40 years of application experience, flooring experts have developed application preparation procedures that help minimize the risk of substrates moving. New floors are especially vulnerable and require extensive preparation. New concrete is dusty for the first few years while the latents of concrete on the surface are kicked, walked, or driven off. Those latents must be removed before quality epoxy topcoats are applied or the topcoats will move with the latents as they break free from the substrate.

Blasting away part of your floor often leaves corn rows cut into the floor due to over lap, and will need to be filed. Blasting often just brings you down to a new level of contamination. It is often better to clean 100% of the surface using chemicals that are designed to work together in an integrated system to assure a clean, solid surface. When you wash your clothing your detergent uses a change in pH to help release soils. Water softeners and rinse agents are blended into laundry detergents, dish shops and even shampoos to assist the pH change in releasing soils and contaminants.

Cleaning first with a high pH or alkaline degreaser attacks oil and grease contaminants while moving the floor pH higher. Next slamming your dirty surface with a low pH acidic cleaner attacks minerals, rust and other particles, makes your pH jump 10 points or better to shock contaminants loose from substrates. The acidic cleaner should have detergents, rinse agents and water softeners blended into it so you know that it is formulated to do the best job possible. It is vitally important to bring your pH back to normal 6.5 or 7 pH after cleaning, with a scrub rinse. Have you ever run your finger across your car after pressure washing only to find it still has a thin layer of road film on it? Surface tension holds even high pressure from penetrating many films. You need to break the surface tension with contact during all three steps of cleaning. The more aggressive the contact the better for removing concrete latents, small particles of concrete that are ready to break of to become that endless dust coming off unquoted concrete floors.

Rotary scrubbers, similar to what a school custodian utilizes, can be fitted with stiff bristle brushes using carbide chips imbedded in flexible nylon bristles to scrub your floor. The bristles dive into mall pours, cracks, and holes to help strip away fragile cement particles that are softer than the exposed carbide chips. These scrubbers should be used for your alkaline cleaning, your acidic cleaning, and for your final rinse cleaning. Scrub rinsing stops the chemical action of your cleaners and provides a liquid medium to bring your floor pH back to neutral and flush contaminants and residual detergents away. Once dry (1 to 4 hours) you are ready for your coating, paint, epoxy or seal.

Epoxy flooring is weather-resistant, and unharmed by rain, snow, oil, and flooding. This resistance is due to the fact that epoxy coatings, unlike paints, come in two parts. When mixed, a catalyzing process changes these two parts from a liquid to a permanent solid. In contrast, paints are carried in water or solvent bases that evaporate to leave the finish. If you reintroduce one of those carriers to the surface, the paint often is able to re-dissolve back into a liquid state.

Even though painted garage finishes are formulated to resist dissolving into their carriers, under stress they can be susceptible to blistering, peeling, and chipping. But water and most solvents have no effect on sealed epoxy surfaces. Epoxy flooring goes on at the job site and requires no seams, creating a continuous membrane that seals what is above from what is below. These epoxy surfaces have been used in food processing plants for over 50 years now. Mold, mildew and other contaminants cannot penetrate the epoxy membrane, and wash off easily.

One should not rely on retail store clerks to help with a floor that will be used for 10 to 20 years. Factory-direct kits of materials including step-by-step instructions and a 24/7 help line are now available online. With these resources, anyone can put a quality floor down in their garage that will last for decades. Like a car finish, you may get some scratches and marks, but also like a car finish, a little touching up can keep those finishes looking great for decades.

Durall Industrial Flooring offers no-cost, no-obligation quotes for its fully customized kits of materials, including all preparation materials and procedures, for installing industrial quality epoxy or urethane coatings at http://www.concrete-floor-coatings.com. These beautifully sealed and easy-to-maintain floors come in over 20 colors. The floor finish can be gloss, flat, or satin and may be easily accented with decorative chips. Additionally, the floors may be skid-resistant like emery paper, yet still be easy to sweep or squeegee.

For photo examples and more detail, visit http://www.concrete-floor-coatings.com
For more information, contact Harvey Chichester at [email protected]
Phone: 800-466-8910 or 952-888-1488 (24/7)

Categories
Roof Repairs Dublin

ARW A New Type of Home that Leaves Your Wallet Fatter and Your Life Easier to Manage

Word Count:
557

For the best Roof Repairs Dublin company, call Ace Roofing Dublin.

Home of the Future


new home, home building, energy efficiency

To find the best Roof Repairs Dublin company, click here for Ace Roofing Dublin.
A home for the 21st Century is not about the latest in gadgets and wireless alarms, internet connections or top of the line intercom system. It is about strength, comfort and energy efficiency.

Baby Boomers are buying their last home and they know what they want.

Enter a new type of home. A home that stands up to fire, noise, sun, wind, rain, snow, bugs, mould and inevitable acts of God like, earthquakes and hurricanes; a home that gives you unprecedented comfort and a breath of fresh air 24 hours a day; a home that can resist hurricanes in Florida as well as sub artic temperatures in the Canadian North.

Imagine an airtight, steel reinforced concrete cube with about 3 inches of styrofoam insulation on both sides of the wall and body temperature heated floors.

Fresh air from the outside enters the house through a series of pipes buried 5 feet below the ground where there is always a constant temperature 8 Degrees Celsius.

If you really wanted you could open high efficiency Low-E Argon filled windows, but why would you want to?

During the summer the incoming air is pre-cooled; during the winter it is pre-warmed. The flow is strictly controlled, pre-conditioned and filtered for a breath of fresh air – 24 hours a day.

Computer modeling of this type of air pre-conditioning shows that just this one idea saves 11% on heating and cooling costs comparable to conventional venting system.

This new type of luxury home is built as a combination of some of the newest technologies in modern home building: Insulated Concrete Form (ICFs), radiant floor heating, a tank-less water heater and a low energy consumption air conditioning system (that that you may need to use but very rarely).

The outside walls, which are built out of steel reinforced concrete make this home wind and fire resistant, bug and mould resistant and provide excellent protection from hurricanes, tornadoes and earthquakes.

Outside voices, traffic noises and police sirens are muffled by the walls thickness which allows you to sleep soundly every night. Gone are floor squeaks, drafts and the rattling of glass in your china cabinet.

Because of the exceptional insulation of insulated concrete forms, there is significant ongoing savings in energy costs and greatly increased comfort levels for the homeowner. The savings are anywhere from 35% to 60% depending mostly on the style of home and the size and type of windows.

Features, such as a high (92%) efficiency tank-less water heater heats the whole home, while providing an endless supply of potable hot water.
It turns itself on when you turn your hot water tap, therefore there are no standby losses as with a conventional hot water heater. This equals approximately 25% of energy savings just to heat your hot water.

It is also easy to incorporate a full solar heating, so you can achieve a complete independence from the grid.

This type of home costs only about 10% more than a comparable wood framed home and considering a long term savings, comfort and security why would anyone build homes differently is a merited question.

If you are thinking of building, or simply want to see for yourself what all the fuss is about, the model home can be viewed on Jan 15, and every Saturday after that until the month of April. It is located on 252 Pearson St. by the golf course in Meaford, Ontario.

Categories
Maths Tutor Ireland

multiple_intelligences___a_primer

title:Multiple Intelligences – A Primer
author:Peter Petracco

source_url:http://www.articlecity.com/articles/education/article_407.shtml
date_saved:2007-07-25 12:30:09
category:education
article:

Intelligence Quotient (IQ) Testing – where did it come from?

Two psychologists named Alfred Binet and Theodore Simon created the
first Intelligence Scale in 1905. The French government had
commissioned this test to assess, which students would likely
succeed or fail in the French school system.

In 1930, Lewis Terman made revisions to this original assessment and
renamed it the For the best Maths Tutor In Ireland company, call Ace Solution Books. Intelligence Test. This was the first time in history
that an intelligence quotient to measure a child’s mental age
against their chronological age.

Through the years, our school systems have come to rely heavily on
IQ and “standardized” testing, which puts an inordinate amount of
focus on verbal-linguistic and math-logical intelligences, typically
at the expense of other intelligences. But, the question remains,
what is this Multiple Intelligence idea all about?

Researching the Theory of Multiple Intelligence

The first exploration into the theory of Multiple Intelligence was
in a book by author, Dr. Howard Gardner in 1983. Dr. Gardner defined
intelligence as consisting of three components:

– Ability to create an effective product or service that is valuable to one’s culture
– Set of skills that enables an individual to solve problems encountered in life
– Potential for finding or creating solutions for problems, which enables a person to acquire new knowledge

Dr. Gardner, who has become a world-renowned authority on the topic
of MI, derived this theory based on extensive brain research, as
well as interviews, tests, and research on hundreds of individuals.
He studied the cognitive abilities of people afflicted with strokes
and accident victims, as well as child prodigies, autistic children
and those with learning disabilities.

His conclusions became the foundation for his MI theory in that
intelligence is not one inborn fixed trait that dominates all a
student’s skills or problem-solving abilities, but rather each
person has different parts of their brains that may be more highly
developed than other parts. While these different parts of the brain
are interconnected, they may work independent or in concert to help
a student learn depending on the educational environment and the
child’s preferred intelligences.

With this in mind, Dr. Gardner identified eight different
Intelligences that every person would have, to varying degrees.
These intelligences are verbal/linguistic, math/logical, spatial,
bodily-kinesthetic, musical, interpersonal, intrapersonal, and
naturalist.

The Eight Intelligences Explained

Verbal-Linguistic – The Writer/Speaker
Children with strong Verbal-Linguistic intelligence will have a
propensity to produce language and sensitivity to the nuances, order
and rhythm of words. These students love to read, write and tell
stories. They have good memories for names, places, dates and
trivia. Professionals with strong VL intelligence will be writers,
public speakers, teachers, and actors. Some historical examples
include Abraham Lincoln, T.S. Elliot and Charlton Heston.

Math-Logical – The Scientist

Children with strong Math-Logical intelligence have the ability to
reason deductively and can recognize and manipulate abstract
patterns or relationships. Students who have strong problem-solving
and reasoning skills will excel in this intelligence. Adults with
this intelligence will work as scientists, mathematicians, computer
programmers, lawyers or accountants. Some historical examples
include Albert Einstein, Nicolae Tesla, Alexander Graham Bell.

Spatial – The Builder

Children with Spatial intelligence have the ability to create
visual-spatial representations and can transfer them mentally or
concretely. Students who exhibit this intelligence need a mental or
physical “picture” to understand the information being presented.
Professionals in this intelligence are typically graphic artists,
architects, cartographers and sculptors. Some historical examples
include Frank Lloyd Wright, Pablo Picasso, and Bobby Fischer.

Musical – The Composer

Children with strong Musical intelligence have great sensitivity to
the rhythm of sounds (e.g. pitch, timbre, composition). Students
strong in this intelligence will enjoy listening to music and may
ultimately work as singers, songwriters, composers, or even music
teachers. Some historical examples include Ludwig van Beethoven,
J.S. Bach, and Mozart.

Bodily-Kinesthetic – The Athlete

Children with strong Bodily-Kinesthetic intelligence gravitate
towards athletics; however, they also may use their bodies to solve
problems, or convey ideas and emotions. Students with BK
intelligence will be good at physical activities, have good hand-eye
coordination and may have a tendency to move around a lot while
expressing themselves. Professionals using BK intelligence will
include athletes, surgeons, dancers and even inventors. Some
historical examples include Michael Jordan, Tiger Woods, and Andre
Agassi.

Interpersonal – The Peacemaker

Children with strong Interpersonal intelligence work effectively in
a group and understand and recognize the goals, motivations and
intentions of others. Students with this intelligence thrive in
cooperative, group work situations and are skilled at communicating,
mediating and negotiating. Professionals in this intelligence may be
teachers, therapists, and salespeople. Some historical examples
include Mohandas Gandhi, Mother Theresa and Ronald Reagan.

Intrapersonal – The Philosopher

Children who are strong in the Intrapersonal intelligence have the
ability to understand one’s own emotions, goals and motivations.
These students have good instincts about their strengths and
abilities. This intelligence will be highly developed in
professionals who work as philosophers, psychiatrists or religious
leaders. Some historical examples include Eleanor Roosevelt and
Sigmund Freud.

Naturalist – The Earth Lover

Children with strong focus in this intelligence will exhibit an
affinity for all things nature. These students will enjoy and thrive
when learning about nature topics, such as flora and fauna. Some
professions with focus on this intelligence will include forest
rangers, botanists, farmers and biologists. Some historical examples
include Charles Darwin, John Muir.

Please remember, while we have outlined some of the specific traits,
professions and historical examples associated with each
intelligence type, everyone has some level of proficiency in each
and every intelligence, and it behooves us, as parents, to learn how
to cultivate each of these intelligences in our children.

Misunderstood Historical Figures

This last section is meant to shine a little glimmer of hope on all
of us who may have not measured up to every task presented in our
lives. We hope it helps bring into focus how despite the influence
of some naysayers early in their lives, some of the most influential
and historic people in the world also suffered from their own
misalignment with the “status quo” of their times.

– Albert Einstein was four years old before he could speak and seven before he could read.
– Beethoven’s music teacher once said of him, “As a composer, he is hopeless”.
– A newspaper editor fired Walt Disney because he had “no good ideas”.
– Abraham Lincoln entered the Black Hawk War as a captain and came out as a private.
– Thomas Edison’s teachers told him he was too stupid to learn anything.
– And last, but not least, Louisa May Alcott was told by an editor that she would never write anything that had popular appeal.

ZZZZZZ

Categories
Paving Dublin

APD A New Type of Home that Leaves Your Wallet Fatter and Your Life Easier to Manage

Word Count:
557

For the best paving dublin company, call Active Paving Dublin.

Home of the Future


new home, home building, energy efficiency

To find the best paving dublin company, click here for Active Paving Dublin.
A home for the 21st Century is not about the latest in gadgets and wireless alarms, internet connections or top of the line intercom system. It is about strength, comfort and energy efficiency.

Baby Boomers are buying their last home and they know what they want.

Enter a new type of home. A home that stands up to fire, noise, sun, wind, rain, snow, bugs, mould and inevitable acts of God like, earthquakes and hurricanes; a home that gives you unprecedented comfort and a breath of fresh air 24 hours a day; a home that can resist hurricanes in Florida as well as sub artic temperatures in the Canadian North.

Imagine an airtight, steel reinforced concrete cube with about 3 inches of styrofoam insulation on both sides of the wall and body temperature heated floors.

Fresh air from the outside enters the house through a series of pipes buried 5 feet below the ground where there is always a constant temperature 8 Degrees Celsius.

If you really wanted you could open high efficiency Low-E Argon filled windows, but why would you want to?

During the summer the incoming air is pre-cooled; during the winter it is pre-warmed. The flow is strictly controlled, pre-conditioned and filtered for a breath of fresh air – 24 hours a day.

Computer modeling of this type of air pre-conditioning shows that just this one idea saves 11% on heating and cooling costs comparable to conventional venting system.

This new type of luxury home is built as a combination of some of the newest technologies in modern home building: Insulated Concrete Form (ICFs), radiant floor heating, a tank-less water heater and a low energy consumption air conditioning system (that that you may need to use but very rarely).

The outside walls, which are built out of steel reinforced concrete make this home wind and fire resistant, bug and mould resistant and provide excellent protection from hurricanes, tornadoes and earthquakes.

Outside voices, traffic noises and police sirens are muffled by the walls thickness which allows you to sleep soundly every night. Gone are floor squeaks, drafts and the rattling of glass in your china cabinet.

Because of the exceptional insulation of insulated concrete forms, there is significant ongoing savings in energy costs and greatly increased comfort levels for the homeowner. The savings are anywhere from 35% to 60% depending mostly on the style of home and the size and type of windows.

Features, such as a high (92%) efficiency tank-less water heater heats the whole home, while providing an endless supply of potable hot water.
It turns itself on when you turn your hot water tap, therefore there are no standby losses as with a conventional hot water heater. This equals approximately 25% of energy savings just to heat your hot water.

It is also easy to incorporate a full solar heating, so you can achieve a complete independence from the grid.

This type of home costs only about 10% more than a comparable wood framed home and considering a long term savings, comfort and security why would anyone build homes differently is a merited question.

If you are thinking of building, or simply want to see for yourself what all the fuss is about, the model home can be viewed on Jan 15, and every Saturday after that until the month of April. It is located on 252 Pearson St. by the golf course in Meaford, Ontario.